Yong Hoon Lee

2025
[66] and (2025). "Design for manufacturability with fused deposition modeling", Chapter in Fused Deposition Modeling: Technology, Applications, and Developments (Anshuman Kumar Sahu, Siba Sankar Mahapatra, eds.), CRC Press. [bibtex] [url] [doi]
[65] and (2025). "Formulating a sequence of compact optimization problems for floating offshore wind turbine based on design coupling information", In ASME International Mechanical Engineering Congress and Exposition (IMECE), Memphis, TN, USA. (Extended Abstract) [bibtex]
[64], and (2025). "Wind turbine control co-design using dynamic system derivative function surrogate model (DFSM) based on OpenFAST linearization", Applied Energy, 396:126203. [bibtex] [pdf] [doi] [google]
[63], and (2025). "Nested control co-design of a spar buoy horizontal-axis floating offshore wind turbine", Ocean Engineering, 328:121037. [bibtex] [pdf] [doi] [google]
[62], , , and (2025). "Multidisciplinary modeling and control co-design of a floating offshore vertical-axis wind turbine system", Journal of Mechanical Design, 147(6):061702. [bibtex] [pdf] [doi] [google]
2024
[61], and (2024). "Enhancing collaborative multidisciplinary optimization through surrogate modeling", In ASME International Design Engineering Technical Conference (IDETC), Washington, DC, USA, pp. 1–4. (Extended Abstract) [bibtex]
[60], , , and (2024). "Modeling and control co-design of a floating offshore vertical-axis wind turbine system", In ASME International Design Engineering Technical Conference (IDETC), Volume 3A: 50th Design Automation Conference (DAC), Washington, DC, USA, pp. 1–10. (Presented with ASME 50th Design Automation Conference Papers of Distinction) [bibtex] [pdf] [doi] [google]
[59] and (2024). "Experimentally supported design optimization of marine hydrokinetic turbine systems with adaptive duct contraction control", In ASME International Design Engineering Technical Conference (IDETC), Volume 3A: 50th Design Automation Conference (DAC), Washington, DC, USA, pp. 1-10. [bibtex] [pdf] [doi]
[58], , , and (2024). "Open-loop control co-design of semisubmersible floating offshore wind turbines using linear parameter-varying models", Journal of Mechanical Design, 146(4):041704. [bibtex] [pdf] [doi] [google]
[57], , , and (2024). "Optimal design of eVTOLs for urban mobility using analytical target cascading (ATC)", In AIAA SciTech Forum and Exposition, Orlando, FL, USA, pp. 1-13. [bibtex] [pdf] [doi] [google]
[56], and (2024). "Battery thermal management systems design considering model fidelity levels and design optimization utility", In AIAA SciTech Forum and Exposition, Orlando, FL, USA, pp. 1-10. [bibtex] [pdf] [doi] [google]
2023
[55] and (2023). "Hydro-structural design exploration of floating platform for offshore energy systems", In ASME International Mechanical Engineering Congress and Exposition (IMECE), Volume 6: Dynamics, Vibration, and Control, New Orleans, LA, USA, pp. 1-8. [bibtex] [pdf] [doi] [google]
[54] and (2023). "Experimental identification of reduced order model parameters for hydrokinetic energy system design", In ASME International Mechanical Engineering Congress and Exposition (IMECE), New Orleans, LA, USA, pp. 1-6. (Extended Abstract) [bibtex] [pdf]
[53], and (2023). "Nested control co-design of a spar buoy horizontal-axis floating offshore wind turbine", Technical report, ArXiv e-prints. [bibtex] [doi] [google]
[52] and (2023). "Multi-body modeling for conceptual design of co-located ocean renewable energy and aquaculture systems", In ASME International Design Engineering Technical Conference (IDETC), Boston, MA, USA, pp. 1-4. (Extended Abstract) [bibtex] [pdf]
[51] (2023). "Fluid Mechanics Laboratory: Lab Manual, The University of Memphis", Technical report, . [bibtex]
[50] (2023). "Multidisciplinary design optimization in floating offshore wind turbines", Cornell University, Ithaca, NY, USA. (Invited Guest Lecture) [bibtex]
[49] (2023). "Thesis and Dissertation LaTeX Template for the University of Memphis", Technical report, . [bibtex] [url]
[48] (2023). "Enabling design of floating offshore wind energy systems", In Korean-American Scientists and Engineers Association, 19th Young Generation Technical and Leadership Conference, San Jose, CA, USA. (Presented with the Outstanding Lecture Award) [bibtex]
2022
[47] (2022). "Design of floating offshore wind turbines using OpenMDAO and Dymos", NASA Glenn Research Center, Cleveland, OH, USA. (Invited) [bibtex] [url]
[46], and (2022). "Control co-design using a nonlinear wind turbine dynamic model based on OpenFAST linearization", In Applied Energy Symposium: MIT A+B, Cambridge, MA, USA. [bibtex] [pdf]
[45], and (2022). "Nested control co-design of a spar buoy horizontal-axis floating offshore wind turbine", In Applied Energy Symposium: MIT A+B, Cambridge, MA, USA. [bibtex] [pdf] [google]
2021
[44] (2021). "System-level integrated and multidisciplinary design on floating offshore wind turbine and engineered materials applications", Texas A&M University, College Station, TX, USA. (Invited) [bibtex] [pdf]
[43], , and (2021). "Open-loop control co-design of floating offshore wind turbines using linear parameter-varying models", In ASME International Design Engineering Technical Conference (IDETC), Volume 3A: 47th Design Automation Conference (DAC), Virtual Conference, pp. 1-13. [bibtex] [pdf] [doi] [google]
[42], and (2021). "A framework for integrating hydrostatics, hydrodynamics, and rigid-body dynamics for the control co-design of floating offshore vertical-axis wind turbine systems", In Wind Energy Science Conference, Hannover, Germany, pp. 9.80. [bibtex] [pdf] [google]
[41], and (2021). "Control co-design of horizontal floating offshore wind turbines using a simplified low order model", In Wind Energy Science Conference, Hannover, Germany, pp. 9.78. [bibtex] [pdf] [google]
[40], and (2021). "Generation and enforcement of process-driven manufacturability constraints: A survey of methods and perspectives for product design", Journal of Mechanical Design, 143(11):110801. [bibtex] [pdf] [doi] [google]
[39] and (2021). "Derivative function surrogate model-based control co-design of nonlinear floating offshore wind turbine models", Technical report, . [bibtex] [url]
[38] and (2021). "Simplified low-order floating offshore wind turbine model-based control co-design implementation for WEIS", Technical report, . [bibtex] [url]
2020
[37] (2020). "Integrated design analysis and optimization tool for floating offshore vertical-axis wind turbines", Technical report, . [bibtex] [url]
[36], and (2020). "Control co-design driver for linear OpenFAST wind turbine model", Technical report, . [bibtex] [url]
[35] (2020). "Methods for the integrated design of viscoelastic materials and structural geometry", PhD thesis, University of Illinois at Urbana-Champaign, Urbana, IL, USA. [bibtex] [pdf]
[34], and (2020). "Computationally-efficient modeling and optimization of strain-actuated solar arrays with tailored viscoelastic damping for spacecraft attitude control", In AAS Guidance and Control Conference, Breckenridge, CO, USA. [bibtex] [pdf]
2019
[33], , and (2019). "Strain-actuated solar arrays for spacecraft attitude control assisted by viscoelastic damping", In Advances in Structural and Multidisciplinary Optimization, Proceedings of the 13th World Congress of Structural and Multidisciplinary Optimization (Beijing, China), Dalian University of Technology Electronic & Audio-Visual Press, Dalian, pp. 149-155. [bibtex] [pdf] [google]
[32], , and (2019). "Continuous relaxation spectra and its reduced-dimensionality descriptions for engineering design with linear viscoelasticity", In ASME 2019 International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, USA. (Extended Abstract) [bibtex] [pdf] [google]
[31], , and (2019). "Critical buckling load of thin-walled plastic cylinders in axial and radial loading: overview and FEA case study", Technical report, engrXiv. [bibtex] [doi] [google]
[30], and (2019). "Overview of the development and enforcement of process-driven manufacturability constraints in product design", In ASME International Design Engineering Technical Conference (IDETC), Volume 4: 24th Design for Manufacturing and the Life Cycle Conference, Anaheim, CA, USA, pp. 1-11. [bibtex] [pdf] [doi] [google]
[29], , and (2019). "Simultaneous design of non-Newtonian lubricant and surface texture using surrogate-based multiobjective optimization", Structural and Multidisciplinary Optimization, 60(1):99-116. (Author Sharable Link: https://rdcu.be/bh0ja) [bibtex] [pdf] [doi] [google]
2018
[28] (2018). "Multiobjective adaptive surrogate modeling-based optimization (MO-ASMO) toolbox II", Technical report, . [bibtex] [url]
[27], , , , , and (2018). "Attitude control system complexity reduction via tailored viscoelastic damping co-design", In AAS Guidance and Control Conference, Breckenridge, CO, USA. [bibtex] [pdf] [google]
[26], , and (2018). "Simultaneous design of non-Newtonian lubricant and surface texture using surrogate-based optimization", In AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, Kissimmee, FL, USA, pp. 1-14. [bibtex] [pdf] [doi] [google]
[25], , , and (2018). "Efficient optimal surface texture design using linearization", In Advances in Structural and Multidisciplinary Optimization: Proceedings of the 12th World Congress of Structural and Multidisciplinary Optimization (Braunschweig, Germany) (A. Schumacher, T. Vietor, S. Fiebig, K. U. Bletzinger, K. Maute, eds.), Springer, Cham, pp. 632-647. [bibtex] [pdf] [doi] [google]
2017
[24], , and (2017). "Designing with non-linear viscoelastic fluids", In The 70th Annual Meeting of the American Physical Society - Division of Fluid Dynamics, Denver, CO, USA. [bibtex]
[23], , and (2017). "Toward co-design of surface textures and non-Newtonian fluids for decreased friction in lubricated viscous sliding", In The Society of Rheology 89th Annual Meeting, Denver, CO, USA. [bibtex]
[22], , and (2017). "Selecting design-appropriate material descriptions for linear viscoelastic materials", In The Society of Rheology 89th Annual Meeting, Denver, CO, USA. [bibtex]
[21] (2017). "Multiobjective adaptive surrogate modeling-based optimization (MO-ASMO) toolbox I", Technical report, . [bibtex] [url]
[20], , and (2017). "A multiobjective adaptive surrogate modeling-based optimization (MO-ASMO) framework using efficient sampling strategies", In ASME International Design Engineering Technical Conference (IDETC), Volume 2B: 43rd Design Automation Conference, Cleveland, OH, USA, pp. V02BT03A023. [bibtex] [pdf] [doi] [google]
[19], , and (2017). "Design-driven modeling of surface-textured full-film lubricated sliding: Validation and rationale of nonstandard thrust observations", Tribology Letters, 65(2):35. [bibtex] [pdf] [doi] [google]
[18], and (2017). "DT QP Project", Technical report, . [bibtex] [url] [google]
[17], , and (2017). "Enhancing full-film lubrication performance via arbitrary surface texture design", Journal of Mechanical Design, 139(5):053401. (Presetned with the Honorable Mention of the 2017 Journal of Mechanical Design Editor's Choice Award) [bibtex] [pdf] [doi] [google]
[16] (2017). "A modular code for teaching surrogate modeling-based optimization", Technical report, . [bibtex] [url]
2016
[15], , and (2016). "A validated computational model for the design of surface textures in full-film lubricated sliding", In The 69th Annual Meeting of the American Physical Society - Division of Fluid Dynamics, Portland, OR, USA. [bibtex]
[14], , and (2016). "Design appropriate modeling for determining optimal friction reduction with surface textures", In CCEFP Fluid Power Innovation & Research Conference, Minneapolis, MN, USA. [bibtex]
[13], , and (2016). "Generalization of surface texture shape reduces friction and increases load capacity simultaneously in sliding contact with full-film lubrication", In CCEFP Fluid Power Innovation & Research Conference, Minneapolis, MN, USA. [bibtex]
[12], , and (2016). "Shape parameterization comparison for full-film lubrication texture design", In ASME International Design Engineering Technical Conference (IDETC), Volume 2B: 42nd Design Automation Conference, Charlotte, NC, USA, pp. V02BT03A037. [bibtex] [pdf] [doi] [google]
[11], , and (2016). "1G.3 Rheological design for efficient fluid power". (Schuh and Lee contributed equally. Schuh presented part I and Lee presented part II. Invited) [bibtex]
2015
[10], , and (2015). "Surface textures and non-Newtonian fluids for decreasing friction in lubricated sliding contact", In CCEFP Fluid Power Innovation & Research Conference, Minneapolis, MN, USA. [bibtex] [google]
2013
[9], , , and (2013). "Natural convection heat transfer characteristics in the canister with horizontal installation of dual purpose cask for spent nuclear fuel", Nuclear Engineering and Technology, 45(7):969-978. [bibtex] [pdf] [doi] [google]
2012
[8], and (2012). "Preliminary design of a transport package for fresh fuels using LS-DYNA", In LS-DYNA Korea User Conference, Seoul, Korea. [bibtex]
2011
[7], , and (2011). "Heat transfer analysis around transport cask under transport hood", In The 8th International Symposium on Radiation Safety Management, Gyeongju, Korea. [bibtex]
2010
[6] (2010). "Thermal design technology for casks considering spent fuel burnup credit", In International Technical Seminar on SNF Storage and Transportation, Daejeon, Korea. [bibtex]
[5], , , and (2010). "Thermal design technology for spent nuclear fuel transport cask", In Korea ANSYS User Conference, Gyeongju, Korea. (Extended Abstract) [bibtex]
[4] (2010). "A study on the application of Navier-Stokes equations to the unstructured grid system", Master's thesis, Ajou University, Suwon, Korea. [bibtex] [pdf]
[3], , and (2010). "Numerical study on performance assessment and installation conditions of an automotive air cleaner", In Korean Society for Computational Fluids Engineering Spring Conference, Jeju, Korea, pp. 263-270. [bibtex] [url] [google]
2009
[2], and (2009). "A study of the assessment process of the performance of automotive HVAC system using FLUENT", In Advanced Technology Engineering Service (ATES) Paper Contest for Academic Users, Seoul, Korea. (Nominated for the Best Paper Award / Presented with the Finalist Award) [bibtex]
2008
[1], , , , and (2008). "Numerical study for efficient air distribution in automotive HVAC system", In The Korean Society of Automotive Engineers (KSAE) Annual Conference and Exhibition, Daejeon, Korea, pp. 594. [bibtex] [url]