Overview of the development and enforcement of process-driven manufacturability constraints in product design (bibtex)
by Patterson, Albert E., Lee, Yong Hoon and Allison, James T.
Abstract:
Design-for-manufacturing (DFM) concepts have traditionally focused on design simplification; this is highly effective for relatively simple, mass-produced products, but tends to be too restrictive for more complex designs. Effort in recent decades has focused on creating methods for generating and imposing specific , process-derived technical manufacturability constraints for some common problems. This paper presents an overview of the problem and its design implications, a discussion of the nature of the manufacturability constraints, and a survey of the existing approaches and methods for generating/enforcing the minimally-restrictive manufacturability constraints within several design domains. Four major design perspectives were included in the study, including the system design (top-down), the product design (bottom-up), the manufacturing process-dominant approach (specific process required), and the part-redesign approach. Manufacturability constraints within four design levels were explored as well, ranging from macro-scale to sub-micro-scale design. Very little previous work was found in many areas, but it is clear from the existing literature that the problem and a general solution to it are very important to explore further in future DFM and design automation work.
Reference:
Albert E. Patterson, Yong Hoon Lee and James T. Allison, "Overview of the development and enforcement of process-driven manufacturability constraints in product design", in ASME IDETC/CIE Conference, DETC2019-97384, 2019, pp. 1-11.
Bibtex Entry:
@inproceedings{Patterson2019DETC,
    author = "Patterson, Albert E. and Lee, Yong Hoon and Allison, James T.",
    title = "Overview of the development and enforcement of process-driven manufacturability constraints in product design",
    booktitle = "ASME IDETC/CIE Conference",
    address = "Anaheim, CA, USA",
    year = "2019",
    month = aug,
    number = "DETC2019-97384",
    pages = "1-11",
    pdf = "https://www.researchgate.net/publication/335327586",
    doi = "10.1115/DETC2019-97384",
%    gsid = "",
    comment = "",
    abstract = "Design-for-manufacturing (DFM) concepts have traditionally focused on design simplification; this is highly effective for relatively simple, mass-produced products, but tends to be too restrictive for more complex designs. Effort in recent decades has focused on creating methods for generating and imposing specific , process-derived technical manufacturability constraints for some common problems. This paper presents an overview of the problem and its design implications, a discussion of the nature of the manufacturability constraints, and a survey of the existing approaches and methods for generating/enforcing the minimally-restrictive manufacturability constraints within several design domains. Four major design perspectives were included in the study, including the system design (top-down), the product design (bottom-up), the manufacturing process-dominant approach (specific process required), and the part-redesign approach. Manufacturability constraints within four design levels were explored as well, ranging from macro-scale to sub-micro-scale design. Very little previous work was found in many areas, but it is clear from the existing literature that the problem and a general solution to it are very important to explore further in future DFM and design automation work.",
}
Powered by bibtexbrowser